Welcome to the Morphy Richards SteamElite Plus troubleshooting and support guide for model 332013.
If you're experiencing a problem with your steam generator, select the issue below that best matches what you're experiencing.
Each guide provides practical, step-by-step troubleshooting to help you identify the cause and, where possible, resolve the issue yourself.
No Steam or Reduced Steam Output
Is your SteamElite Plus heating up but producing little or no steam?
This may be related to the water level, heating time, steam settings or how the steam controls are being operated.
Our troubleshooting guide explains how to check the water supply, steam trigger, temperature and ready indicators, along with other possible causes of reduced steam performance.
SteamElite Plus Not Producing Steam
Iron Not Heating Up
Is your SteamElite Plus switching on but the iron's soleplate remains cold or isn't reaching the selected temperature?
The SteamElite Plus 332013 has separate controls for soleplate temperature and steam output. If the iron isn't heating correctly, the issue may be related to the temperature dial, power supply or automatic shut-off feature.
Our troubleshooting guide explains:
- How to check the temperature dial and heating indicator.
- What to do if the soleplate remains cold.
- How to check whether automatic shut-off has activated.
- The difference between an iron that isn't heating and one that isn't producing steam.
- When a heating problem may require further investigation.
SteamElite Plus (332013) – Iron Not Heating Up
Excessive or Interrupted Steam
Is your SteamElite Plus producing too much steam, delivering steam inconsistently or cutting out during ironing?
The SteamElite Plus 332013 has adjustable steam levels and separate controls for continuous steam and steam boost. Some changes in steam output are normal, but repeated interruptions may require further investigation.
Our troubleshooting guide explains:
- How to adjust the Low, Medium and High steam settings.
- How to use continuous steam and steam boost correctly.
- Why using both steam controls together can interrupt steam delivery.
- What to check if steam stops unexpectedly.
- How water level, temperature and auto shut-off affect steam operation.
- When further investigation may be required.
SteamElite Plus (332013) – Excessive or Interrupted Steam
Water Dripping or Pouring from the Soleplate
Is your SteamElite Plus releasing water droplets or pouring water through the soleplate instead of producing steam?
Small water droplets may occasionally occur if the iron hasn't reached the correct temperature or the steam generator base is moved during use.
Our guide explains:
- How to check the temperature and steam indicators.
- How to use the steam trigger and steam boost correctly.
- Why keeping the base stationary matters.
- What to check if water continues dripping.
- When excessive water discharge may require further investigation.
SteamElite Plus (332013) – Water Dripping or Pouring from the Soleplate
Water Leaking from the Tank, Base or Steam Hose
Is water escaping from the removable tank, steam generator base or steam hose rather than through the iron's soleplate?
External leaks require different checks from occasional droplets during steam ironing.
Our guide explains:
- How to identify where water is escaping.
- How to check the removable tank and filling cap safely.
- Why the dirty water chamber should be emptied after Auto Clean.
- What to look for if the base or steam hose is leaking.
- When to stop using the appliance and request further assistance.
SteamElite Plus (332013) – Water Leaking from the Tank, Base or Steam Hose
Brown or Discoloured Water from the Soleplate
Is your SteamElite Plus releasing brown or discoloured water, dark particles or marks onto clothing?
Discolouration can sometimes be associated with mineral deposits, residue or unsuitable water being used in the appliance. However, persistent brown water isn't automatically normal operation and may require further investigation.
Our troubleshooting guide explains:
- What may cause brown or discoloured water.
- Which water mixture is recommended for model 332013.
- How the automatic cleaning system helps remove mineral deposits.
- How to empty the dirty water chamber safely.
- How to check whether marks are coming from the soleplate.
- When persistent staining or discolouration may require further investigation.
SteamElite Plus (332013) – Brown or Discoloured Water from the Soleplate
Low Water Level Light Staying On
Is the low-water warning light on your SteamElite Plus staying illuminated, even after you've refilled the water tank?
The SteamElite Plus 332013 has a low-water warning system that stops steam production when there isn't enough water. If the warning remains active after refilling, there are several checks you can carry out.
Our troubleshooting guide explains:
- What the low-water warning light means.
- How to refill and correctly fit the detachable water tank.
- Which water mixture is recommended for model 332013.
- What happens if the water runs low during Auto Clean.
- What to check if the warning clears but steam doesn't return.
- When a persistent low-water warning may require further investigation.
Low Water Level Light On – SteamElite Plus
How to Descale Your SteamElite Plus
Want to know how the automatic cleaning system works or how to empty the dirty water chamber?
The SteamElite Plus 332013 has an automatic cleaning system designed to help remove mineral deposits from its internal boiler.
Auto Clean operates after approximately 5 litres of water have been used, once the appliance has cooled completely and is next switched on.
Our guide explains:
- When the automatic cleaning cycle starts.
- How long the cleaning process takes.
- What the descaling indicator means during cleaning.
- How to empty the collected dirty water safely.
- Which water mixture is recommended for your appliance.
How to Descale Your SteamElite Plus (332013)
Auto Clean or Descale Not Working
Is your SteamElite Plus failing to start or complete its automatic cleaning cycle, or is the descaling indicator staying on?
The SteamElite Plus 332013 has an automatic cleaning system that operates when required. It does not have a separate manual button to start or reset Auto Clean.
Our troubleshooting guide explains:
- Why Auto Clean may not have started yet.
- What to do if the cleaning cycle pauses or stops.
- How to resolve a low-water interruption.
- What the flashing descaling indicator means.
- What to check if the descale light remains active.
- When further investigation may be required.
SteamElite Plus (332013) – Auto Clean & Descaling Troubleshooting
Electrics Tripping
Does your SteamElite Plus trip the electrics, circuit breaker or RCD when plugged in, switched on or during ironing?
Electrical tripping is a protective response that can occur for several reasons, including an issue with an appliance or household electrical supply.
Stop using the appliance and do not reconnect it until the cause has been assessed.
Our guide explains:
- Why a steam generator may cause the electrics to trip.
- The difference between circuit overload and electrical faults.
- What you can safely check without reconnecting the appliance.
- What to look for when inspecting the plug, cable and base unit.
- Why you shouldn't repeatedly test the appliance in different sockets.
- What information to provide for further assessment.
Electrics Tripping – SteamElite Plus
Recommended Water for Your SteamElite Plus
Not sure whether to use tap water, distilled water or deionised water in your SteamElite Plus?
The SteamElite Plus 332013 has specific water requirements. Morphy Richards recommends a mixture of 50% tap water and 50% deionised, distilled or demineralised water to help reduce limescale buildup.
Our guide explains:
- Which water mixture is recommended for model 332013.
- Why you shouldn't use 100% distilled or deionised water.
- Which scented waters and additives to avoid.
- Whether filtered water is suitable.
- How to fill and empty the water tank correctly.
- How the automatic cleaning system helps manage mineral deposits.
What Water Should I Use in My SteamElite Plus?
Routine Care and Storage
Looking after your SteamElite Plus can help maintain its performance and reduce unnecessary wear.
- Water tank: Check the water level before use and never exceed the MAX filling mark.
- Automatic cleaning: Allow Auto Clean to complete when required and empty the dirty water chamber after the cycle has finished and the appliance has cooled completely.
- Soleplate: Allow the iron to cool completely before wiping the soleplate with a soft, damp cloth.
- Water: Use the recommended water mixture and avoid scented ironing water, perfume, starch or other additives.
- Power cable and steam hose: Avoid tight bends, twisting or pulling. Store them without placing unnecessary strain on the connections.
- Storage: Switch off, unplug and allow the appliance to cool completely before storing it.
Never immerse the iron or steam generator base in water.
Need Help Finding the Right Guide?
Select the troubleshooting guide above that best matches the issue you're experiencing.
Each guide provides step-by-step checks to help you identify the cause and, where possible, resolve the problem yourself.
If the troubleshooting doesn't resolve your issue, you'll find details of how to contact our Customer Support team at the end of the relevant guide.