Using the correct water in your Power 2400W SteamElite Plus Steam Generator is essential for safe, efficient ironing and long-term appliance health. The wrong water can cause limescale, brown water, dripping, or steam issues, which are not covered under warranty.
🌟 1. The Recommended Water Mix
For optimal performance:
50% Tap Water + 50% Deionised, Distilled, or Demineralised Water
Fill the tank up to the MAX line only.
Never use:
100% demineralised/distilled water
Scented or ironing water
Water from refrigerators or with additives (e.g., starch, fragrance)
⚡ Correct water helps prevent limescale buildup, maintains consistent steam, and keeps the boiler and soleplate in top condition.
🧪 2. Why Tap + Demineralised Water?
Tap water contains minerals (calcium, magnesium) that cause limescale when heated.
Pure demineralised water lacks trace minerals, which can cause corrosion or poor heat transfer over time.
A 50/50 mix balances mineral protection while preventing limescale buildup, giving optimal steam flow.
💡 Tip: Using the correct water mix will reduce the need for frequent Auto Clean cycles and keep water in the boiler clear.
♻️ 3. Benefits of Correct Water Use
Consistent Steam Output: Prevents dripping, brown water, and interrupted steam.
Longevity: Protects internal components, reducing wear and extending appliance life.
Maintenance Made Easy: Regular Auto Clean cycles are more effective with the correct water.
Safe Ironing: Avoids hot water leaks or mineral deposits on clothes.
⚡ 4. What Happens with the Wrong Water
Using incorrect water can lead to:
Limescale buildup → flashes descale indicator, reduces steam efficiency.
Brown water → minerals released from the boiler, not a defect.
Leaking or dripping → water may escape from soleplate or base.
Interrupted or excessive steam → inconsistent ironing performance.
⚠️ These issues are preventable and are not covered under the warranty.
💡 5. Recommendations for Users
Always mix 50/50 tap + demineralised water for everyday use.
Empty the tank after each ironing session — never leave water sitting overnight.
Run Auto Clean cycles regularly — ideally after every 5 litres of water used.
For areas with very hard water, consider using filtered tap water in the mix.
✅ Key Takeaways
Correct water mix = 50% tap + 50% demineralised/distilled.
Using the wrong water can cause brown water, limescale, leaks, and interrupted steam, none of which are defects.
Regular maintenance plus correct water ensures consistent performance, long life, and safe ironing.