Get your Morphy Richards Halo 1.5L Alexa Kettle connected and ready to use with the Amazon Alexa app.

You can connect your kettle using the QR code on the product or, if you're unable to scan the code, complete the setup manually through the Alexa app.

Follow the steps below to get started.

Before you start

Before setting up your Morphy Richards Alexa Kettle, make sure you have:

Your Morphy Richards Halo 1.5L Alexa Kettle
A smartphone or tablet with the Amazon Alexa app installed
A compatible 2.4 GHz Wi-Fi connection
Your Wi-Fi password
Your kettle connected to the mains supply

If you want to control your kettle using Alexa voice commands, you'll also need a compatible Alexa-enabled device.

Permissions during setup

During setup, the Alexa app may ask for permission to access features on your smartphone or tablet.

If you're setting up your kettle using the QR code, you'll need to allow the Alexa app access to your camera so it can scan the code.

Follow any other permission requests shown in the Alexa app during setup.

Step 1 – Connect your kettle to the power

Connect the power plug to the mains supply and place the kettle securely onto its cordless power base.

When the kettle is connected to the mains, it will beep and the Power symbol will illuminate, showing that the kettle is in standby mode.

Step 2 – Put your kettle into pairing mode

Press the illuminated Power symbol to activate the kettle's full control panel.

Then:

Press and hold the SET button for 3 seconds.

The kettle will beep and the Wi-Fi symbol will start to flash.

The flashing Wi-Fi symbol means your kettle is ready to pair with the Alexa app.

Step 3 – Open the Amazon Alexa app

Open the Amazon Alexa app on your smartphone or tablet.

Select:

Devices → + → Add Device

From the list of available device types, select:

Kettle → Morphy Richards

Follow the instructions shown in the Alexa app.

Step 4 – Choose how you want to set up your kettle

You can set up your Morphy Richards Alexa Kettle by scanning its QR code or by using the manual setup option.

Setting up using the QR code

Your Morphy Richards Alexa Kettle has a QR code on the product.

When the Alexa app asks you to scan the code:

Select the option to scan the barcode/QR code.
Allow the Alexa app to access your camera if prompted.
Position the QR code within the scanning area shown in the Alexa app.
Keep your phone or tablet steady until the code is recognised.

Important: Scan the QR code through the Alexa app

Scan the QR code from within the Alexa app when prompted during setup, rather than using your phone's normal camera app.

This allows Alexa to use the code as part of the kettle setup process.

If you're unable to scan the QR code, select:

Don't have a barcode?

You can then continue with the manual setup process.

For more help, see:

How to Scan the QR Code to Set Up Your Alexa Kettle

How to Manually Set Up Your Morphy Richards Alexa Kettle

Step 5 – Wait for Alexa to find your kettle

The Alexa app will search for your Morphy Richards Kettle.

This can take around 45 seconds, so allow the search to finish before trying again.

Keep your kettle connected to the mains and in pairing mode while Alexa is searching.

Step 6 – Connect your kettle to Wi-Fi

Once Alexa has found your kettle, you'll be asked to select your Wi-Fi network.

Select your network and enter your Wi-Fi password when prompted.

Check your Wi-Fi connection

Your Morphy Richards Alexa Kettle requires a compatible 2.4 GHz Wi-Fi connection for setup.

Make sure you've entered your Wi-Fi password correctly.

The user manual also recommends avoiding unusual characters or symbols in your Wi-Fi network name or password, as these may cause connection issues.

If your kettle won't connect, see:

My Alexa Kettle Won't Connect to Wi-Fi

Step 7 – Complete your Alexa setup

Once your kettle has connected successfully, it will be added to the Alexa app.

Follow the remaining on-screen instructions to complete the setup.

Alexa may ask you to choose where your kettle is located. Select the appropriate room, or choose Skip if you don't want to assign your kettle to a room.

Your Morphy Richards Halo Alexa Kettle is now set up and ready to use.

Can I change the name of my Alexa Kettle?

Yes. You can rename your kettle in the Alexa app.

To change the name:

Open the Amazon Alexa app.
Go to Devices and select your Morphy Richards Kettle.
Select Settings.
Select Edit Name.
Enter your preferred name.
Return to the kettle's main screen when finished.

Choosing a simple, distinctive name can make your kettle easier to identify in the Alexa app and when using Alexa voice features.

What can I do once my kettle is connected?

Once your kettle has been successfully paired, it will appear under Devices in the Alexa app.

Select your kettle to open its main control screen.

From here, you can access available smart features and information, including:

Switching the kettle on and off
Checking the current water temperature
Checking the remaining water level
Selecting a preset temperature
Changing the temperature unit
Switching the Keep Warm function on or off
Checking the descale countdown
Resetting the descale countdown
Creating Alexa Routines
Accessing Alexa voice functionality

Your Morphy Richards Halo Alexa Kettle also offers six temperature settings:

100°C – Fully Boiled
90°C – Coffee
85°C – Tea
80°C – Green Tea
60°C – Honey
40°C – Warm Water

For more information, see:

How to Select the Temperature on Your Alexa Kettle

How to Use the Keep Warm Function

How to Use Alexa Voice Commands with Your Morphy Richards Kettle

How to Use Alexa Routines with Your Morphy Richards Kettle

Having trouble setting up your Alexa Kettle?

If your kettle isn't connecting or Alexa can't find it, we've created separate troubleshooting guides to help: