Regular cleaning helps keep your Morphy Richards iron or steam generator performing at its best, so you can enjoy smooth ironing and consistent steam.
The correct cleaning method depends on your model. Always follow your user manual for instructions on descaling, self-cleaning and the type of water to use.
How do I descale my iron or steam generator?
Many Morphy Richards irons and steam generators have a built-in self-clean, anti-scale or descaling system. The steps vary between models, so there isn’t one descaling method suitable for every appliance.
To find the correct instructions:
- Check your model number on the appliance’s rating label.
- Find your user manual and look for the cleaning, maintenance or descaling section.
- Follow the instructions carefully, including any guidance on cleaning frequency and descaling indicator lights.
Do not add vinegar, descaling chemicals or other cleaning products to the water tank unless your user manual specifically instructs you to do so.
For steam generators, follow any cooling instructions before opening a boiler cap, removing a scale collector or carrying out maintenance. Hot water and steam can cause burns.
How do I clean the soleplate?
The soleplate is the flat surface underneath your iron that comes into contact with your clothes. To remove light surface residue:
- Switch off and unplug the appliance.
- Allow the soleplate to cool completely.
- Gently wipe it with a soft, damp cloth.
- Dry it with a soft cloth before storing.
Never use abrasive cleaners, metal scouring pads or sharp objects, as these can scratch or damage the surface.
For stubborn marks or burnt-on fabric, check your user manual for the recommended cleaning method before using any cleaning products.
How often should I clean or descale my iron?
Follow the maintenance schedule in your user manual and respond to any cleaning or descaling alerts on your appliance.
The recommended frequency can depend on your model, how often you use it and the hardness of your water. Reduced steam or white residue may indicate that cleaning is needed, but these symptoms can have other causes too.
How can I help prevent build-up?
- Use the water type recommended in your user manual. Water requirements vary between models.
- Avoid scented ironing water and additives unless your manual specifically permits them.
- Empty the water tank after use, following your model’s instructions.
- Keep the soleplate clean and follow the recommended maintenance routine.