For models 303250, 303251 and 303252
Your Morphy Richards EasyCharge cordless steam iron has a built-in self-cleaning function designed to help keep the water valve, steam chamber and steam vents clear of lint and loose mineral deposits.
Regular self-cleaning helps maintain steam performance and can resolve problems such as weak steam, blocked steam vents or white mineral residue coming from the soleplate.
Follow the instructions below to clean your iron safely.
When Should I Self-Clean My Cordless Iron?
Self-cleaning is recommended as part of regular maintenance, particularly if:
- Your iron produces little or no steam despite being correctly heated.
- Steam output has gradually become weaker.
- White mineral residue is coming from the soleplate after repeated use.
- You live in a hard-water area or suspect mineral deposits have accumulated.
Self-cleaning helps remove loose deposits from the steam system. It does not repair damaged components or guarantee that every steam-related issue will be resolved.
Before You Begin
Important: Self-cleaning releases boiling hot water and steam from the soleplate. Take care to avoid burns or scalding.
Before starting:
- Use a suitable sink with sufficient space to hold the iron safely above it.
- Keep children and pets away from the cleaning area.
- Keep the powered base, mains plug and electrical cable well away from the sink and any water.
- Ensure the iron and power base are not visibly damaged.
- Use water only. Do not add vinegar, chemical descalers, detergents or other cleaning products.
The powered base must remain away from the sink throughout the procedure. Never immerse the iron or base in water.
How to Self-Clean Your Cordless Steam Iron
Step 1: Fill the Water Tank
- Ensure the appliance is unplugged before filling.
- Set the steam switch to OFF.
- Fill the water tank with water up to the MAX line.
- Close the filling cover securely.
Morphy Richards recommends deionised, distilled or demineralised water to help reduce limescale damage, particularly in hard-water areas.
Step 2: Heat the Iron to MAX
- Connect the powered base to a mains socket.
- Position the iron securely on the base, ensuring the electrical connectors are aligned.
- Turn the temperature dial to MAX.
- Allow the iron to heat until the temperature indicator changes from red to green.
The iron must reach the MAX temperature before you begin self-cleaning.
Step 3: Hold the Iron Over a Sink
While the iron is still hot:
- Carefully lift it from the powered base.
- Hold it horizontally over a sink.
- Keep the hot soleplate facing away from your hands and body.
- Ensure the power base, mains plug and cable remain well away from the sink.
Caution: The soleplate will be extremely hot.
Step 4: Press and Hold the Self-Clean Button
- Press and hold the self-clean button.
- Steam and boiling hot water will begin draining through the holes in the soleplate.
- Continue holding the button while gently moving the iron backwards and forwards.
- Continue until the water tank is empty.
- When steam and hot water stop coming from the soleplate, release the self-clean button.
This process flushes loose mineral deposits and residue from the steam chamber.
Warning: Keep your hands and body away from the steam and boiling water. Do not touch the soleplate or direct the discharge towards anyone.
Step 5: Reheat the Soleplate
Once the self-cleaning process has finished:
- Return the iron to its powered base.
- Allow the iron to heat again.
This helps dry the soleplate after cleaning.
Step 6: Switch Off and Allow to Cool
- Disconnect the powered base from the mains supply.
- Rest the iron safely on its heel.
- Allow the iron to cool completely.
- Once cool, wipe the soleplate with a cold, damp cloth.
- Empty any remaining water from the tank.
Your iron is now ready for storage or its next use.
What Should I Avoid When Self-Cleaning?
To protect your iron and maintain safe operation:
- Do not use vinegar, chemical descalers or cleaning solutions in the water tank.
- Do not attempt to descale the soleplate using descaling products.
- Do not immerse the iron, power base or electrical connectors in water.
- Do not touch the soleplate while it is hot.
- Do not place the powered base or mains plug near the sink.
- Do not attempt to dismantle the iron or clean inside its electrical components.
Always follow the instructions in the user manual for your model.
How Can I Reduce Limescale Build-Up?
To help maintain your cordless iron:
- Use deionised, distilled or demineralised water, as recommended by Morphy Richards.
- Carry out the built-in self-cleaning procedure as part of regular maintenance.
- Empty the water tank after ironing.
- Avoid adding starch, fragrances, additives or cleaning products to the water.
- Allow the iron to cool fully before storing it.
Regular maintenance helps keep the steam system clear and reduces the likelihood of mineral deposits affecting performance.
What If My Iron Still Isn't Steaming After Self-Cleaning?
If you've completed the self-cleaning procedure but your iron is still producing little or no steam, check that:
- The water tank contains sufficient water.
- The steam switch is turned ON.
- The temperature is set within the correct steam range.
- The iron has reached the selected temperature.
- You're returning the iron to its powered base every few seconds to maintain heat.
Remember: Your EasyCharge cordless iron does not contain a rechargeable battery. The powered base heats the iron, and it must be returned to the base frequently during use.
For further troubleshooting, see:
Why Is My Morphy Richards Cordless Steam Iron Not Steaming?
Still Need Help?
If you've followed the self-cleaning instructions and the issue remains unresolved, please contact Morphy Richards Customer Support.
Please provide:
- Model number: 303250, 303251 or 303252.
- Serial number: Where available, or a photograph of the product rating label.
- Proof of purchase: Showing the retailer, purchase date and product.
- Description of the issue: Explain whether the problem involves weak steam, no steam or residue.
- Maintenance completed: Confirm that you've followed the self-cleaning procedure and explain the result.
- Water type used: Confirm whether you've been using tap, deionised, distilled or demineralised water.
- Photographs or video: Where safe and relevant, provide evidence showing the problem.
Our team will review the information and advise whether further troubleshooting or a warranty assessment is appropriate.
Please do not return your appliance unless instructed to do so.
For further guidance, visit our EasyCharge Cordless Iron Troubleshooting & Support Hub.