Having difficulty removing a sticker or label from your Morphy Richards appliance?
Some promotional stickers can be particularly difficult to peel away and may leave sticky residue behind.
Vegetable oil or baby oil can help loosen stubborn adhesive, making it easier to remove both the sticker and any remaining residue. We've received positive feedback from customers who have successfully used these methods, including on the Total Control Soup Maker.
Follow the steps below for the best results.
1. How Do I Remove a Sticker That Won't Peel Off?
- Switch off and unplug your appliance, allowing it to cool completely.
- Gently wipe the sticker with a soft cloth dampened in warm, soapy water, provided the surface is suitable for damp cleaning.
- Carefully lift one corner of the sticker using your fingernail.
- Slowly peel the sticker away without pulling forcefully.
- If the sticker tears or remains firmly attached, follow the oil method below.
Avoid scraping or forcing the sticker off, as this could damage the appliance's finish.
2. How Do I Remove a Stubborn Sticker Using Vegetable Oil or Baby Oil?
If the sticker is difficult to remove, either vegetable oil or baby oil can help loosen the adhesive on suitable exterior surfaces.
- Check your product's user manual for any specific cleaning restrictions.
- Test a tiny amount of vegetable oil or baby oil on an inconspicuous area first.
- Apply a small amount of your chosen oil to a soft, lint-free cloth, not directly onto the appliance.
- Gently work the oil around the edges of the sticker, where the adhesive is accessible.
- Allow a little time for the oil to loosen the adhesive.
- Carefully lift and peel away the sticker as the adhesive begins to release.
- Repeat the process if necessary rather than pulling or scraping the sticker off.
Particularly stubborn stickers may require several gentle attempts. Allowing time for the oil to work is more effective than using excessive force.
Only use oil on suitable exterior surfaces. Keep it away from buttons, displays, vents, electrical connections and openings.
3. How Do I Remove Sticky Residue After Removing the Sticker?
If the sticker leaves adhesive behind:
- Apply a small amount of vegetable oil or baby oil to a soft cloth.
- Gently rub the sticky area to loosen the remaining adhesive.
- Repeat as necessary until the residue begins to lift.
- Wipe the area with a cloth lightly dampened in warm, soapy water to remove the oil.
- Dry thoroughly using a clean, soft cloth.
Both vegetable oil and baby oil have worked successfully for customers removing stubborn sticker residue.
Avoid harsh chemicals or abrasive cleaning products.
4. Why Is the Sticker on My Total Control Soup Maker So Difficult to Remove?
Some customers have found that the promotional sticker on their Morphy Richards Total Control Soup Maker is particularly difficult to peel away or leaves stubborn adhesive behind.
Although the adhesive can be difficult to remove, we've received positive customer feedback about using vegetable oil or baby oil to loosen the sticker and remove the remaining residue.
For best results, gently work a small amount of oil around the sticker's edges, allow time for the adhesive to loosen and repeat if necessary.
A stubborn promotional sticker does not, by itself, mean your Soup Maker is faulty or affect its cooking performance.
A replacement appliance may have the same type of sticker, so exchanging it would not necessarily resolve the issue.
5. What Should I Avoid When Removing Stickers?
To protect your appliance's finish, avoid:
- Knives, blades, sharp scrapers or other tools.
- Abrasive sponges, scouring pads or steel wool.
- Acetone, paint thinners and strong solvents.
- Harsh chemical cleaners or adhesive removers unless specifically approved in your product instructions.
- Excessive force, heat or water.
Never remove permanent safety, rating or identification labels. This guidance applies only to removable promotional or packaging stickers.
6. Does a Difficult-to-Remove Sticker Mean My Appliance Is Faulty?
No. A stubborn promotional sticker or adhesive residue does not, by itself, indicate a fault with your appliance.
It does not normally affect the appliance's safety, operation or performance.
We recommend using a small amount of vegetable oil or baby oil on a soft cloth, allowing time for the adhesive to loosen and repeating the process gently if necessary.
Both methods have been successful for other Morphy Richards customers and can usually remove stubborn stickers and residue without the need for a replacement appliance.