Fastbake Breadmaker – Model 48281
If your Morphy Richards Fastbake Breadmaker 48281 displays an error message, the appliance may be too hot to start another programme or may have detected a temperature sensor problem.
There are two error messages associated with this model:
- H – Breadmaker temperature too high. Allow the appliance to cool before restarting.
- E – Temperature sensor disconnected. Stop using the appliance and contact Morphy Richards Customer Support.
Follow the instructions below for the message displayed on your breadmaker.
H Error – Breadmaker Is Too Hot
The H error message means the temperature inside your breadmaker is too high to start the selected programme.
This can happen when attempting to start another baking cycle shortly after the previous one has finished.
The message is a temperature warning and does not necessarily indicate a fault with the appliance.
How to Clear the H Error
- Press and hold the Start/Stop button for approximately two seconds to stop the programme.
- Take care around the breadmaker, as the baking pan and internal surfaces may still be very hot.
- Wearing suitable oven gloves, carefully remove the baking pan.
- Leave the breadmaker lid open to allow the appliance to cool.
- Once the appliance has cooled, replace the baking pan.
- Turn the baking pan clockwise to lock it securely into position.
- Select your required programme using the Menu button.
- Press and hold the Start/Stop button for approximately one second to begin the programme.
- Check that the colon (:) on the display begins flashing.
Important: Do not attempt to bypass the H warning or force the breadmaker to operate while it is too hot.
How Long Should I Allow the Breadmaker to Cool?
The cooling time depends on how hot the appliance is.
If the H message appears when selecting the Extra Bake programme immediately after another programme, allow the breadmaker to cool for approximately 10 minutes before trying again.
In other circumstances, the appliance may require longer to cool sufficiently.
Only restart the programme once the breadmaker has cooled and the temperature warning has cleared.
If H continues to appear after the appliance has cooled, contact Customer Support.
E Error – Temperature Sensor Disconnected
The E error message indicates that the breadmaker's temperature sensor is disconnected.
The temperature sensor monitors the appliance's internal temperature during operation.
Unlike H, E is not a normal cooling warning and cannot be resolved through ingredient adjustments, programme selection or repositioning the baking pan.
What to Do if E Appears
- Stop attempting to operate the breadmaker.
- Switch off the appliance at the mains socket.
- Unplug the breadmaker.
- Allow it to cool if it has recently been used.
- Do not dismantle the appliance or attempt to access the internal temperature sensor.
- Contact Morphy Richards Customer Support for further assistance.
Do not repeatedly restart the breadmaker or attempt to bypass the E error.
This message requires further assessment rather than additional customer troubleshooting.
What if My Breadmaker Display Shows Something Else?
Not everything displayed on the breadmaker's LCD screen is an error message.
The display also shows normal operating information, including:
- The selected breadmaking programme.
- The remaining programme time.
- The selected loaf size.
- The crust colour setting.
- The delay timer setting.
Flashing Colon (:) on the Display
A flashing colon between the hours and minutes indicates that a programme has started.
This is normal operation and does not indicate a fault.
Display Shows 0:00
When a baking programme finishes, the breadmaker beeps and displays 0:00.
The appliance then automatically enters its Keep Warm function for up to 60 minutes.
This is normal and does not indicate an error.
Breadmaker Is Beeping
The breadmaker normally beeps:
- When a control-panel button is pressed.
- During the second kneading cycle of certain programmes, when additional ingredients can be added.
- When a programme finishes.
- When the Keep Warm function finishes.
These sounds do not necessarily indicate a fault.
For further information, see:
Why Does My Breadmaker Beep During the Cycle?
Why Won't My Breadmaker Start After an Error Message?
The action required depends on the message displayed.
If H is displayed:
The breadmaker is too hot. Follow the cooling instructions above before restarting.
If E is displayed:
The temperature sensor is disconnected. Stop using the appliance and contact Customer Support.
If no error message is displayed:
Check that the programme has been selected correctly and the Start/Stop button has been pressed and held for approximately one second.
Also check whether the delay timer has been activated.
For further troubleshooting, see:
My Morphy Richards Breadmaker 48281 Won't Turn On or Start – What to Check
How to Help Prevent Temperature Warnings
To reduce the likelihood of an H warning:
- Allow the breadmaker to cool sufficiently between baking programmes.
- Avoid immediately starting another baking cycle while the appliance is still hot.
- Follow the correct cooling procedure when using the Extra Bake programme.
- Position the breadmaker on a firm, flat, heat-resistant surface.
- Keep the appliance's air vents unobstructed.
- Do not cover the breadmaker during operation.
These precautions may help prevent H temperature warnings but will not resolve an E temperature sensor error.
Frequently Asked Questions
Is H a Fault With My Breadmaker?
Not necessarily.
H indicates that the breadmaker's internal temperature is too high.
If the message clears after cooling and the appliance operates normally, no further action may be required.
If it continues to appear after adequate cooling, further investigation may be necessary.
Can I Restart the Breadmaker Immediately After H Appears?
No. Allow the breadmaker to cool first.
Remove the baking pan carefully using oven gloves, leave the lid open and restart only once the temperature warning has cleared.
Can I Fix the E Error Myself?
No. E indicates a disconnected temperature sensor, which is not a customer-serviceable component.
Stop using the appliance, unplug it and contact Customer Support.
Do not attempt to dismantle the breadmaker.
Does an Error Message Mean I Need a Replacement Breadmaker?
Not necessarily.
H may be resolved by allowing the appliance to cool.
E requires further assessment by Customer Support. The appropriate next steps will depend on the circumstances and the information provided.
Still Need Help?
If your breadmaker continues displaying H after cooling, or displays E, please contact Morphy Richards Customer Support.
To help us investigate, please provide:
- Model number: 48281.
- Serial number: Please provide the serial number found on the appliance's rating label.
- Proof of purchase: Showing the product, retailer and purchase date.
- Exact error message: Confirm whether the display shows H, E or another message.
- When the message appears: For example, immediately after switching on, when starting a programme or following a completed baking cycle.
- Programme selected: Confirm which programme you were attempting to use.
- Troubleshooting completed: For H, confirm whether the breadmaker was allowed to cool and whether the message cleared.
- Photo: Where safe, provide a clear photograph of the LCD display showing the message.
Our team will review the information and advise on the appropriate next steps.
Please do not return your appliance unless instructed to do so.